Size: 175*275*17MM aluminum alloy frame with corner protector and bracket
3. Parameters of aeration pump:
Air pump type: DC micro air pump Rated voltage: 6.0V
Bath sound: less than 60dB Maximum air flow: 1.4L/min
4. Circuit parameters:
Operating voltage range: 5.5V-8.4V Maximum operating current: 150MA (high-end); 100MA (low-end).
Quiescent current: less than 10UA discharge protection voltage: 5.5V
Charging protection voltage: 8.4V Solar charging time: 8H
5. Working mode:
Mode 1: High-end (green light is always on) Working hours: one day and one night Flow: 1.3L/min
Mode 2: Low gear (the blue light is always on) Working hours: Two days and two nights Flow rate: 0.7L/min
Mode 3: Low gear Open for 10 seconds and stop for 10 seconds (green and blue double-color light is always on) Working time: three days and three nights
Product selling point
1. The 2019 new high-power solar outdoor fishing aeration pump, the new product of Amazon's explosive category "Sun aquarium products" is coming!
2. Solar panel: It adopts polycrystalline tempered glass laminate, which is not easy to be broken or scratched. The parameters have been upgraded from 2.5W to 5W in the old model, with greater power and longer battery life.
3. Battery part: with 18650 7.4V/2400MAh lithium battery, the battery capacity is larger, the power is stronger, and the battery life is longer!
4. Mode: The new aeration pump adopts three-position design to meet various usage scenarios (emergency aeration for indoor Fish Tanks after power failure, aeration for outdoor fish ponds, aeration for plants, and aeration for outdoor fishing/sea fishing)
5. Major upgrades have been made to the new product and the old product. The product has made targeted functional adjustments based on the sales data returned by the senior development and operation of Amazon cross-border e-commerce. The product gas output has increased compared with the old product. 50%, the oxygen area is wider, the product works more stable for a long time, and the downtime problem that often occurs in the old model is eliminated.
Instructions for use
Connect the bubble stone to the exhaust hole and put it into the water that needs oxygenation. The solar cell faces the sunlight, and there is no obstruction between the solar cell and the sunlight. Press the POWER switch and the oxygen pump will start to work, press the MODE button You can choose different working modes.
1. This product is an electronic product. The aeration device cannot be placed in water, and the diversion hole cannot be blocked.
2. This product is a solar product, and the charging speed is related to the intensity of sunlight. Regularly clean the dirt on the solar cell to improve the charging efficiency.