Description
Small Portable Solar Power Fish Pond Solar Pond Aerator
Product Detail
|
Working time on fully charged battery |
Around 20 hours |
|
Material |
ABS |
|
Battery |
18650 Li-ion 3.7V 1800mAH |
|
Pump |
AC air pump, 3.5V 450MA Sound: less than 60dB Minimum air flow:0.6L/min |
|
Product working voltage range |
3.0V-4.25V |
|
Discharge protection voltage |
3.0V |
|
Over charge protection voltage |
4.25V |
1. Battery standard:
Battery type: 18650 lithium battery
Nominal voltage/capacity: 3.7V 1800mAH
2. Solar panel parameters:
Solar voltage: 6V
Solar current: 420MA
Process: PET lamination
3. Parameters of aeration pump:
Air pump type: AC air pump
Rated voltage: 3.5V
Maximum current: 450MA
Bath sound: 50dB
Minimum air flow: 1L/min
4. Circuit parameters:
Working voltage range: 3.0V-4.25V
Maximum working current: 450MA
Discharge protection voltage: 3.0V
Charging protection voltage: 4.2V
Working time: about 22 hours
Whether with light control: without light control
Product weight: 0.65Kg
Product size: 21.5X17.5X7CM
Single package size: 30X28X17 cm
Single gross weight:0.700 kg
5. Working mode:
Mode 1: High-end (steady green light)
Mode 2: Low gear (dark blue light is always on)
Mode 3: Low gear for 10 seconds and stop for 10 seconds. (Sky blue is always bright)
Instructions for use:
Connect the bubble stone to the exhaust hole and put it into the water that needs oxygenation. The solar cell faces the sunlight. There is no obstruction between the solar cell and the sunlight. Press the POWER switch and the oxygenation pump will start to work.
Pay attention to things:
1. This product is an electronic product. The aeration device cannot be placed in water, and the diversion hole cannot be blocked.
2. This product is a solar product, and the charging speed is related to the intensity of the sun. Regular cleaning of the dirt on the solar cell can improve the charging efficiency.
Method of Operation:
1.Put the solar panel in a well-lit area to ensure exposure to sunlight.
2.Connect the air stones to the main unit before they are dropped into the water.
3.Press the POWER switch button on the back of the solar panel, the air pump will work once there is electricity stored in the built-in battery. Press the MODE button to choose air pumping high or low positions
Useful tips
1. Do not put the product into water; its division outlet cannot be blocked. 2. Solar charging speed is depended by sunlight intensity. Please clean the surface of solar panel regularly to keep the charging efficiency.
